PondMerchant Pond Catalog > Pond Product Categories > Aquascape > Filters - Parts > AquaBlox Water Matrix by Aquascape
PLEASE NOTE: We are currently moving our facility. As a result, we will not be able to process any new orders for the next several months. Any current orders will be processed and delivered.
 Item # |
AquaBlox Water Matrix by Aquascape |
|
Large Water Matrix #29492 |
Small Water Matrix #29491 |
|
|
Aquascape's AquaBlox Water Matrix is designed to replace up to 90% of the gravel traditionally used in the reservoir of Pondless Waterfalls applications.
The AquaBlox Water Matrix can also be used to replace the lower layer of 4-6 inch boulders in the bottom of Snorkel Vault and Centipede Module Wetland filter applications.
|
MODEL# |
SIZE |
DIMENSIONS |
VOLUME |
WEIGHT |
Load Bearing Weight |
|---|---|---|---|---|---|
|
29491 |
Small |
26.5”L x 16”W x 9.5”H |
17 Gallons |
10.35 Lbs |
5,472 lbs./sq. ft. |
|
29492 |
Large |
26.5”L x 16”W x 17.5”H |
32 Gallons |
15.4 Lbs |
5,472 lbs./sq. ft. |
* Over 3 times more water storage capacity than gravel - The AquaBlox Water Matrix can hold approximately 7.4 gallons of water per cubic foot. Gravel can hold approximately 2.2 gallons of water per cubic foot.
* Extra water storage capacity results in less routine maintenance topping reservoir to compensate for evaporation.
* Easier to clean and less prone to clogging than traditional gravel basins.
* Smaller Reservoirs! The ability to hold more water per cubic foot allows for smaller reservoirs.
* Less labor excavating the basin, as well as less labor moving the manytons of gravel for basin.
* Uses less liner and geotextile underlayment.
* AquaBlox are assembled on-site making transporting and installation extremely efficient
Please Note:The Load Bearing side must be at the top:
AquaBlox Small Water Matrix (the top Load-Bearing part is 26.5" x 16")
AquaBlox Large Water Matrix (the top Load-Bearing part is 26.5" x 16")
Click on pdf File below for Instruction Manual:
